| Emulations |
Emulates DEC VT-52, VT-100 and VT-220 (VT-320) terminals, with several enhancements. Other emulations available upon request (ADM-3A, QT-102 etc.) |
| Parameter settings |
On-screen set-up for serial parameters: emulation, language, keyboard type and mode, screen saver, cursor type and mode, scrolling, status line, printer etc. Battery backed RAM for storing the setup data (no DIP-switches needed). Setup adjustments can be made via the host port or keyboard. Permanent setup values can be patched to EPROM, instructions described in the User's Manual. |
| Host port |
RS-232C serial interface as standard. RS-485 (RS-422) or 20 mA current loop optional. Baud rates up to 38,400 bps. Multi drop communications support. |
| Keyboard |
A VT-220 compatible 105-key keyboard as standard. A serial ASCII keyboard or IBM-PC (XT) keyboard available as option. Supports multiple national key layouts. |
| Printer port |
Serial RS-232C interface, RTS handshaking. |
| Display |
Planar EL640.400 electroluminescent display |
| Display color |
Yellow/Black |
| Display area |
195 x 122 mm (W x H) |
| Pixel pitch |
0.30 x 0.30 mm |
| Viewing angle |
over 140º |
| Refresh rate |
70 Hz or higher (at request) |
| Touch Screen |
IR beam technology. Scanning rate 50 ms typically. Physical resolution 24 by 16 beams. Effective resolution 48 by 32 points. Co-ordinate mode or keyboard emulation. Repeat delay, repeat rate, tracking speed etc. software selectable. |
| Operating voltage |
12 VDC (10.8...14.4 V). 24 V or adaptive 11...30 V version upon request |
| Current consumption |
Typically 1.2 A, 2.0 A max. @ 12 VDC |
| Operating temperature |
0...+50 °C (standard), -20...+65°C (extended temperature version) |
| Storage temperature |
-25...+75 °C (standard version), -40...+125 °C (extended temperature version) |
| Housing |
Rugged black steel case. For Touch Screen versions front mask is equipped with IR transparent bezel and circular polarizing filter |
| Outer dimensions |
With housing and Touch Screen 292 x 210 x 69 mm (W x H x D). Front assembly thickness without rear panel 45 mm.
Module dimensions:
-with Touch Screen: 271 x 192 x 63 mm (W x H x D)
-without Touch Screen: 271 x 192 x 49 mm (W x H x D) |
| Weight |
2.5 kg (with metal case, module only about 0.7 kg) |
| Mounting |
Supplied with 2 pcs of M6 mounting screws. Footstand optionally available. |
